General Information

• Door Face: Wood grain texture, pencil grooves 3" on center
• Section Heights: 21" and 24"
• Section Joint: Tongue and Groove joint between sections with thermal break
• Steel concealed backer plates, pre-painted galvanized end caps
• Colors selection: White, Brown, and Sandstone. Metallic Silver available in Microgroove or Flush only (RAL 9006)
• R-value: 7.4
• Bottom weather seal: U-shape loop type PVC with adjustable aluminum retainer
• Warranty & Finishing Instructions
  • Commercial Warranty
  • Metal Door Painting Instructions

Standard Widths

8'-2", 9'-2", 10'-2", 12'-2", 14'-2", 16'-2" ,18'-2"

Standard Heights

8'-1", 9'-1", 10'-1", 12'-1", 14'-1", 16'-1", 18'1"

Hardware

15" radius torsion hardware; track is 2" hemmed and bracket mounted. 3" track supplied when required by weight. Heavy duty steel rollers, non corrosive door fixtures and 14 gauge graduated hinges are standard. Double end hinges and long stem rollers are included on doors as required by width and weight. U-shaped galvanized struts are supplied as required by width and weight to keep the door rigid. All doors are standard with interior slide bolt lock.

Window Selection

Sizes indicate the approximate visible viewing area.

(A) Clear Anodized Full-View Aluminum Section - 750A
(B) ASA 24”Wx12”H
(C) ASA 24”Wx6”H

All windows are standard with 1/8” clear annealed single pane glass. Optional single pane tempered, textured, tinted and insulated glass.