250P
The 250P industrial steel garage doors (formerly marketed as 920) are strong and are designed for applications such as warehouse buildings and other commercial or industrial buildings. Deep ribs are roll formed into the door giving the door construction added strength. Doors are available in 20 gauge galvanized steel that are protected with a white polyester finish. Insulation and back skin options are available as well as windows and several glass options.
General Information
- Steel Thickness: 20 GA, G 40 galvanized and painted
- Overall Thickness: 2"
- Section Heights: 21" and 24"
- Section Joint: Tongue and groove weather joint
- End Stiles & Center Stiles: 18 GA galvanized, End Stiles are galvanized and painted
- Bottom weather seal: U-shape loop type vinyl with adjustable aluminum retainer
- Finish: 4 Coat Process, Galvanizing, bonderizing, baked on epoxy, and polyester top coat
- Warranty & Finishing Instructions
Standard Widths
8'-2" 9'-2" 10'-2" 12'-2" 14'-2" 16'-2" 18'-2" 20'-2" 22'-2" 24'-2"
Standard Heights
8'-1" 9'-1" 10'-1" 12'-1" 14'-1" 16'-1"
Hardware
15" radius torsion hardware; track is 2" hemmed and bracket mounted. 3" track supplied when required by weight. Heavy duty steel rollers, non corrosive door fixtures and 14 gauge graduated hinges are standard. Double end hinges and long stem rollers are included on doors 16'-2" wide or as required by weight. U-shaped galvanized struts are supplied on doors over 14'-2" wide or as required by weight to keep the door rigid. All doors are standard with interior slide bolt lock.
Window Selection
Sizes indicate the approximate visible viewing area.
(A) Clear Anodized Full-View Aluminum Section - 750A
(B) ASA 24”Wx12”H
(C) ASA 24”Wx6”H
All windows are standard with 1/8” clear annealed single pane glass. Optional single pane tempered, textured, tinted and insulated glass.
**The actual color may vary from what you are seeing due to processing and the color calibration of your computer monitor.

1/4" Clear

1/8" Bronze

White Laminated

Black Laminated

1/8" Satin Etch

Frosted Gluechip

1/8" Greylite

1/8" Mistlite

1/8" P516 Obscure
**The actual color may vary from what you are seeing due to processing and the color calibration of your computer monitor.
**The actual color may vary from what you are seeing due to processing and the color calibration of your computer monitor.
Recommended Options
Insulate
25,000, 50,000 or 100,000 Cycle Torsion Springs
Other Options
- Insulate and Back
- Polystyrene, Steel Back Cover (R 8.1)
- Polyurethane, Steel Back Cover (R 11.5)
- Polystyrene, High Impact Polystyrene Sheeting Back Cover (R 8.5)
- Polyurethane, High Impact Polystyrene Sheeting Back Cover (R 11.9)
- 20 Gauge Steel
- Single Pane and Insulated Glass Options
- 25,000, 50,000 and 100,000 Cycle Torsion Springs
- Lift Options
- Low Clearance
- High Lift
- Vertical Lift
- Angle Mounted Track
- 3” Track/Rollers
- Double End Hinges and Long Stem Rollers (when not standard)
- Chain Hoist, Reduced Drive
- LiftMaster Electric Openers
- Powder Coated Hardware