PRODUCT INFO
CONSTRUCTION: The Therma Classic is made from hot dipped galvanized wood grain textured steel skins that are embossed with raised panel designs then sandwiched with a polystyrene core. This type of construction forms a thermal barrier between front and back of door. 20 Ga. steel backer plates are toggle locked to the inside of the back skin prior to assembly. Exterior skins are secured to a polystyrene core with Urethane adhesive, a method of construction that is unparalleled in strength.
NOMINAL SPECIFICATIONS:
- Section Joint: Tongue and Groove joint between sections with thermal break
- Thickness: 2"
- Finish: Baked on polyester enamel
- Colors selection: White
- Bottom weather seal: U-shape loop type vinyl with aluminum retainer
- Limited Lifetime Warranty
STANDARD WIDTHS: 8'-0", 9'-0", 10'-0", 16'-0", 18'-0", 20'-0"
STANDARD HEIGHTS: 7'-0", 8'-0", 9'-0", 10'-0", 12'-0", 14'-0"
Sections available in 27", 28", 31" and 32" in height
OPTIONS:
- Widths up to 20', heights up to 14', in one inch increments
- 1/8" clear annealed glass standard, clear obscure and insulated glass optional.
- Decorative hardware
- 25,000, 50,000 & 100,000 cycle torsion springs
- Low clearance, high lift and vertical lift track and hardware
HARDWARE: 15" or 20" radius torsion hardware; track is 2" bracket mounted. Quiet long life nylon rollers, non corrosive door fixtures and graduated hinges are standard. U-shaped galvanized struts are supplied with every double car door to keep the door rigid. All doors meet or exceed 12.4/70 MPH wind load per ANSI/DASMA 102-1996.
AVAILABLE COLORS*:

* The actual color may slightly vary from what you are seeing, depending on the color calibration of your computer monitor.






